Onkyo Radio TX NR900 User Manual

-
TX NR900/TX-NR900E  
How to Enjoy Net Audio  
Features  
System Requirements  
Requirements for listening to both Internet radio stations  
and music files saved on the music server  
I Modem (a device that provides Internet connections via leased lines;  
The TX-NR900/900E is a network audio client that is connected via  
a LAN to a PC and allows you to enjoy music files saved on the PC,  
as well as Internet radio, from anywhere in your home.  
e.g., a cable modem, xDSL modem, terminal adapter)  
* To have access to Internet, you typically need to make a contract  
with an Internet service provider (ISP). Modem requirements differ  
from ISP to ISP; for detailed information, consult with your ISP or  
PC retailer.  
Internet radio features  
The TX-NR900/900E provides enhanced support for Internet radio and  
allows you to:  
I Router (gateway) (a device that enables multiple PCs or devices to  
Listen to both WMA and MP3 audio streamed from Internet radio  
stations  
connect to the Internet simultaneously)  
An IP address can be obtained automatically by using the router’s  
DHCP function.  
Select stations by genre, location, or language  
Preset up to 30 Internet radio stations  
* Some routers have built-in modem functionality. Router  
requirements differ from ISP to ISP; for detailed information,  
consult with your ISP or PC retailer.  
Net-Tune Features  
I Ethernet CAT-5 cable  
I Minimum Internet Connection Requirements:  
The Net-Tune Central is software which distributes music files stored on  
PC through LAN to the TX-NR900/900E.  
Broadband Internet Connection  
The TX-NR900/900E plays distributed music data whenever you need.  
* This software is available from Onkyo’s web  
DHCP (Dynamic Host Configuration Protocol) based network  
(requires a DHCP-enabled router)  
100Base-TX switch built-in broadband router (recommended)  
US  
Europe  
Japan  
I Minimum PC System Requirements:  
600 MHz Intel Pentium III CPU or better, Windows 98SE, Me, XP,  
or 2000 OS (operating system), more than 20 MB of free hard disk  
space, RAM (Windows 98SE, Me, 2000; requires 128 MB, XP;  
requires 256 MB) and Ethernet port.  
Asia, Oceania, and Central and South America  
In the connection between the Net-Tune Central and the TX-NR900/  
900E, the standard TCP/IP network protocol and the Onkyo’s  
proprietary NTSP protocol is used for music distribution through LAN.  
The NTSP protocol handles not only data for music itself but also  
additional music information including the name of tracks and artists,  
enabling high usability.  
Not compatible with Macintosh systems.  
Notes:  
If your ISP contract assumes manual configuration of network  
settings, you need to manually configure your network settings as  
described in “Network Setup Menu” (see page 6).  
In addition to the music distribution server function, the Net-Tune  
Central can automatically retrieve the music files stored on PC to register  
them easily with the Net-Tune Central database.  
The TX-NR900/900E does not support network settings for PPPoE  
connections; if your ISP contract requires PPPoE, therefore, you  
must have a gateway/router with PPPoE support.  
The Net-Tune Central supports WAVE (PCM), MP3 and WMA formats.  
The WAVE format has high sound quality (equivalent to CD) with no  
compression. The MP3 format is widely used through Internet  
environment and has near-CD quality with compression. The WMA  
format is developed by Microsoft® has also near-CD quality using higher  
compression rate.  
You may have to set up a proxy server to listen to Internet radio,  
depending on the ISP you choose. If your PC is configured to use a  
proxy server for Internet access, the TX-NR900/900E must also be  
configured the same way. For more information, see “5-2. Proxy  
Setup Sub-menu” (see page 7).  
Editable music library  
With the Net-Tune Central software, you can edit music titles, artist  
names, genre names, and so on, while you can also create new genre  
names, for all music files saved on the PC’s hard disks.  
The Net-Tune Central also provides this information with the TX-NR900/  
The TX-NR900/900E is designed to take advantage of the DHCP  
and AutoIP functionality, thereby automatically configuring the  
network settings. If you opt not to use the DHCP and AutoIP  
functionality, you should manually configure the network settings.  
For more information, see “5-1.IP Address Sub-menu” (see page 7).  
900E, allowing you to select tracks easier on the TX-NR900/900E.  
To enjoy music on Internet Radio, it is assumed that you provide a  
broadband Internet connection on which you can successfully run a  
web browser. If you have any problem in connecting to the Internet,  
consult with your ISP.  
Hint:  
File Format: MP3/WMA (Approximately 1 MB for 1 minute)  
WAVE (Approximately 10 MB for 1 minute)  
* How much free space is actually required also depends somewhat on  
such factors as the format and reserved space of your hard disk, and  
the bit rate at which you make recordings.  
* Depending on the MP3 encoder you use, your recorded file may not  
be playable, or can play the music degraded by noise, or can  
generate uncomfortable sound.  
Also note that no WMA format file with copyright protection  
enabled is playable on the TX-NR900/900E.  
 
Enjoying Music on Internet Radio or PC  
NET AUDIO  
NET A  
SETUP  
MASTER VOLUME  
STANDBY/ON  
STANDBY  
ENTER,  
POWER  
ON  
OFF  
DISPLAY  
ZONE  
REC  
2
(GRN  
RED  
)
)
(
DVD  
VIDEO  
1
VIDEO  
2
VIDEO  
3
VIDEO  
4
VIDEO  
5
TAPE  
TUNER  
PHONO  
C
D
NET AUDIO  
AUDIO  
SELECTOR  
DISPLAY  
PURE AUDIO UPSAMPLING  
VCR  
1
VCR  
2
VIDEO  
5
INPUT  
PHONES  
REC OUT ZONE  
2
OFF  
STEREO SURROUND  
THX  
DSP  
DIMMER LATE NIGHT Re  
-
EQ  
SETUP  
ENTER  
RETURN  
RANDOM  
ALBUM  
REPEAT  
PLAYLIST  
ZONE  
2
LEVEL  
DIGITAL  
S
VIDEO  
VIDEO  
L
AUDIO  
R
ARTIST  
GENRE  
/
Alphanumeric keys  
ENTER  
* In the NET AUDIO mode, buttons  
will function according to the  
associated labels printed in blue.  
Enjoying Internet radio  
7. Press the ENTER button.  
Buffering starts with the following message displayed.  
To listen to Internet radio, the connection/configuration requirements  
listed on pages 1, 2 must be satisfied. When you perform the step 2 and  
following steps, use the remote controller.  
When the buffering completes, the TX-NR900/900E starts playback  
of the broadcast.  
1. Press the NET AUDIO button (on the main unit) or the  
NET A button (on the remote controller).  
Calls the setting used last time. If you want to listen to Internet radio  
immediately after using Music Server on your PC, you can switch to  
Internet radio by pressing the same button again. It will take some  
time until the connection is established.  
Note:  
If you are connected to the Internet via a slow link (such as a dial-up  
connection) rather than a broadband link (via an xDSL or cable modem), you  
may not be able to enjoy Internet radio as you expect or at all.  
2. Press the DISPLAY button on the remote controller.  
You can switch the displayed content using the  
/
buttons.  
After the switch operation, the display mode appears for 3 seconds, and  
then the appropriate information scrolls.  
3. Use the  
/
buttons to select one of the main menu;  
If there is no information on title or artist, No Infoappears.  
When using the OSD screen, all the information is displayed on one  
screen without scrolling.  
Genres, Location, or Language.  
To cancel, press the button.  
4. Press the ENTER button.  
OSD  
iNet Radio Station ONK  
7ch  
Wait while your requested data is download from the XiVA  
Internet Radio Service.  
Track:  
Program:  
Artist:  
Data:  
Station ONK Live  
Station ONK Live  
RealOnkyoNet.com  
WMA 20kbps  
* What is the XiVA Internet Radio Service?  
The XiVA Internet Radio Service provides tuning information,  
allowing you to select from a large number of stations. You can  
find Internet Radio Stations based on your interests, musical taste,  
language and location.  
Tuned  
When Genres is selected:  
Allow a few moment until the Genre menu appears. When the main  
Display  
list of genre appears, use the  
/
buttons to select a genre as  
desired. Pressing the ENTER button brings up the sub-list of the  
genre you selected, which prompts you to further select one of the  
I
Presetting Internet radio stations:  
items using the  
/
buttons.  
You can preset up to 30 internet radio stations.  
When Location is selected:  
The list containing names of countries appears. Use the  
to select an item as desired.  
/
buttons  
1. Receive your desired station.  
When Language is selected:  
The list of languages appears. Use the  
desired item.  
2. Press the button.  
/
buttons to select your  
The TX-NR900/900E enters into preset mode; the currently selected  
preset number flickers for 5 seconds.  
If no list is found, No Listappears.  
Preset number  
You can return from this screen to the previous selection screen by  
pressing the button.  
ch  
5. Press the ENTER button.  
You are presented with a list of radio station names.  
3. Press the ENTER button.  
6. Use the  
/
button to select one of the radio stations.  
Now the preset is complete.  
You can return to the previous step by pressing the button.  
3
 
Enjoying Music on Internet Radio or PC  
I
Choosing a preset Internet radio station:  
Disconnected”  
The Net-Tune Central server may not start or the server connected  
last time may not be found. Make sure the connections between  
router, PC and the TX-NR900/900E. Start the Net-Tune Central  
server or select another server referring to Select Serveron 2-1.  
Music Server submenu(see page 6).  
1. Press the NET AUDIO button (on the main unit) or the  
NET A button (on the remote controller).  
Calls the setting used last time.  
If you want to listen to Internet radio immediately after using Net  
Server on your PC, you can switch to Internet radio by pressing the  
same button again.  
4. Press the  
button to play the music file.  
The TX-NR900/900E provides five normal display modes; you can  
use the  
/
button to switch among them.  
2. Press the CH  
button.  
When you choose a preset station, the station name is displayed for 5  
seconds, and then the progress of buffering is displayed instead.  
OSD  
Music Server  
Track: 1/12  
Play  
1m20s>  
My sweet candy  
Album:  
Artist:  
Data:  
My Best 100  
Happy PanPot  
MP3 160kbps  
When the progress of buffering reaches 100%, you will be presented  
with the playing screen.  
Display  
I
Erasing a preset Internet radio station:  
To stop playback:  
1. Select the station to erase, following the instructions  
described above.  
Press the button on the remote controller.  
To pause playback:  
2. Press the button.  
Press the button on the remote controller.  
To select a track:  
The TX-NR900/900E enters into preset erase mode.  
Press the  
Press the  
/
button on the remote controller.  
3. Press the ENTER button.  
button to move to the next track.  
Press the  
hold down the  
button to move to the beginning of the current track;  
button to move to the previous track.  
Your selected station is erased.  
You can also use the Alphanumeric keys to select a track.  
ex.  
Playing a music file saved on your PC  
To select number 3, press 3.  
To play music files saved on your PC, the requirements listed on page 1  
must be satisfied.  
To select number 10, press 0.  
To select number 37, press --/---, 3 and 7.  
To select number 123, press --/--- twice, and then press 1, 2, and 3.  
1. Start Net-Tune Central on your PC.  
Wait for a while until Net-Tune Central starts up.  
It may take few tens of seconds.  
To fast-forward/reverse the music:  
Press and hold the  
forward the music; press and hold the  
button on the remote controller to fast-  
button to fast-reverse the  
2. Turn on the TX-NR900/900E.  
music. When the music is rewound to the beginning, normal playing  
starts.  
When you connect the TX-NR900/900E to the network first time, it  
will be connected to the server found first.  
To switch to the track list:  
3. Press the NET AUDIO button (on the main unit) or the  
NET A button (on the remote controller).  
While playing the music, you can press the cursor button to  
display a list of currently open tracks.  
If you want to play a music file immediately after listening to  
Internet radio, you can switch to Net Server on your PC by pressing  
the same button again. The track you played the last time is called up  
so that you can play it again.  
Until the TX-NR900/900E connects to the network, finds the server  
and completes the connection, Network Starting...and  
Connecting...appears. After completing the connection to the  
Net-Tune Central server, the display changes to the normal  
indication.  
If the following messages appear, check the message meaning and  
perform the appropriate procedures.  
No Track”  
The Net-Tune Central could not retrieve any track information.  
Register tracks with the Net-Tune Central.  
If you have already registered tracks, use the DISPLAY, ARTIST,  
ALBUM, GENRE, and PLAYLIST buttons to display information.  
4
 
Enjoying Music on Internet Radio or PC  
I
Playing a music file at random:  
When the numeric value is selected:  
Pressing the button once will perform the search by the numeric value  
2.”  
Press the RANDOM button on the remote controller while playing  
stops.  
Pressing the RANDOM button on the remote controller displays the  
current random settings.  
This button switches between two alternative settings: On and Off.  
Symbols  
CAPS  
On: Randomly plays the tracks in the currently selected mode.  
Off: Random mode is disabled.  
After necessary settings complete, press the  
button.  
I
Playing a music file repeatedly:  
3. Press the ENTER button.  
Press the REPEAT button on the remote controller.  
Pressing the REPEAT button on the remote controller displays the  
current repeat settings.  
This button cyclically switches among three alternative settings: Repeat  
1 All Off.  
The title of your selected track appears.  
You can choose another track by pressing the  
/
buttons.  
Press the button to return to the previous step.  
You can also select the list number using the numeric buttons.  
Repeat 1: Repeats the current track only.  
Repeat All: Repeats the tracks in the currently selected mode.  
4. Press the ENTER button.  
Repeat Off: Repeat mode is disabled.  
You can operate the TX-NR900/900E when playing and stopped.  
The playback begins.  
To cancel the operation:  
I
Selecting a track list:  
You can use the music file data saved on your PC to select which tracks  
to play.  
Press the button to return to the previous step. You can cancel the  
whole operation by pressing the button in step 1.  
For example, you can:  
Note:  
Select a track list based on the album name  
Select a track list based on the artist name  
Select a track list based on the genre name  
Select a play list  
Pressing DISPLAY button on the main unit will display the current  
listening mode.  
1. Press either the ALBUM, ARTIST, GENRE, or  
PLAYLIST button on the remote controller.  
Search the track stored on the PC with your selected mode to display  
it in the display.  
In the artist and album modes, the tracks are displayed in  
alphabetical order.  
You can also use the procedure below.  
1. Press the DISPLAY button  
2. You can press the  
four modes: Albums  
/
buttons to cyclically switch among the  
Artists Genres Playlists.  
3. Press the ENTER button  
2. Use the buttons to select one of the menu.  
/
At this time, pressing button brings you one step behind where  
you can change the selection you made.  
Also, pressing button in the genre or artist selection mode will  
display a list of albums with the genre or artist you selected.  
In the album, artist or playlist selection mode, using the  
Alphanumeric buttons will accelerate your selecting operation.  
Using the Alphanumeric keys  
The alphanumeric keys allow you to input one of the letters or numbers  
printed on their key tops. Pressing the CAPS button cyclically switches  
the types of input; Upper case (A) Lower case (a) Numeric value  
(1) ... When your desired input type is selected, then press the  
alphanumeric key.  
Let us take the 2ABC button for example to see how it can be operated.  
When the upper case is selected:  
Pressing the button once will perform the search by the letter A.Pressing  
twice will do the search by B,pressing three times by C.”  
When the lower case is selected:  
Pressing the button once will perform the search by the letter a.”  
Pressing twice will do the search by b,pressing three times by c.”  
5
 
ConfiguringVarious Settings  
Navigating through the Setup Menu:  
Be sure to press the RCVR button before using the remote controller.  
Network Setup Menu  
Before you can use the TX-NR900/900E to play music contained in the  
music library on the Net-Tune server and listen to Internet radio, you  
must correctly configure the TX-NR900/900Es network settings so that  
it can connect to your LAN and the Internet.  
It is strongly recommended to use a broadband connection (via an xDSL  
or CATV leased line) and a router. If you are connected to the Internet  
via a narrowband dialup connection, you may not be able to enjoy  
Internet radio as you expect or at all.  
1. Press the SETUP button.  
2. Using the  
and  
cursor buttons, select the menu  
that you want to enter.  
3. Press the ENTER button to enter the selected menu.  
Before setting up the TX-NR900/900E, make sure that you are already  
using a router that provides Internet access and that the TX-NR900/900E  
is correctly connected with your router or hub via a LAN cable.  
For more information on Internet connectivity, consult with your ISP  
(Internet Service Provider) or refer to the documentation of your router.  
4. Use the and cursor buttons to select the sub-menu  
that you want to enter and press the ENTER button.  
Each sub-menu has different settings that can be changed as desired,  
and they are all explained in the pages that follow. To change a  
setting, first select it using the and cursor buttons, and then  
change the setting using the and cursor buttons.  
Advanced Menu  
5.Network Setup  
5. Press the RETURN button to set the new settings and  
return to the previous menu screen.  
5-1.IP Address  
a.DHCP/AUTO-IP:On  
b.IPAddress
Press the RETURN button again to return to the main menu.  
Advanced Menu  
:192.168.9. 62  
c.SUBNET Mask  
:255.255.255. 0  
5.Network Setup  
d.Gateway  
Input Setup Menu (When NET AUDIO is selected  
as the input source)  
:192.168. 9. 1  
DNS Server
e.1st:210.134.143. 7  
f.2nd:125. 40.104. 0  
5-2.Proxy Setup  
a.ProxyServer
:On  
b.Proxy Address  
When NET AUDIO is selected as the input source, you can set up Music  
Server on this screen.  
c.Proxy Port  
: 8080  
Advanced Menu  
2-1.Music Server  
Input:NET A  
2-2.Playback OSD Display  
Input:NET A  
5.Network Setup  
Quit:|SETUP|  
a.Select Server  
a.Playback OSD Display  
:Full  
1.IP Address  
2.Proxy Setup  
3.MAC Address  
4.Client Setup  
:My PC-ABCDE  
OK  
Save settings  
Advanced Menu  
5.Network Setup  
|ENTER|Quit:|SETUP|  
Quit:|SETUP|  
Quit:|SETUP|  
5-3.MAC Address  
a.MACAddress
:XX:XX:XX:XX:XX:XX  
Advanced Menu  
5.Network Setup  
2-1. Music Server Sub-menu  
a. Select Server  
Select a network server that exists on the network.  
5-4.Client Setup  
a.ClientName
:TX-NR9000102
b.WakeuponLAN
:On  
c.NTSPPort  
:XXXXXX  
Quit:|SETUP|  
* mark appears to the servers detected on the network. If there is a server  
which does not have * mark, make sure that the server is started.  
After selection, use the  
ENTER button to confirm your selection.  
button to select OK, and press the  
Quit:|SETUP|  
2-2. Playback OSD Display Sub-menu  
a. Playback OSD Display  
Full: Select this when you want to have the OSD display the  
information on the currently played track.  
Simple: Displays the current track information summary in two  
lines.  
DHCP (Dynamic Host Configuration Protocol) and AutoIP are  
mechanisms for network configuration, which assign IP addresses  
automatically to the network devices such as the TX-NR900/900E, PC,  
and broadband router.  
DNS (Domain Name System) is a mechanism which translates domain  
names into IP addresses or vice versa. Domain names such as  
210.199.170.69 are used for actual network data transfer.  
Off: Select this when you do not want to have the information  
displayed on the OSD.  
6
 
Configuring Various Settings  
5-1. IP Address Sub-menu  
5-2. Proxy Setup Sub-menu  
You can use this submenu to turn on/off the DHCP and Auto IP  
functionality.  
Configure this item if your TX-NR900/900E uses a proxy server to  
connect to the Internet.  
Also, you can use this menu to manually configure network settings.  
Referring to the documentation from your ISP, enter the IP address and  
subnet mask assigned to your TX-NR900/900E as well as the IP  
addresses of the default gateway and DNS server.  
After necessary settings complete, press the RETURN button to go back  
to 5. Network Setup Menu, select Save Settings, and press the  
ENTER button to save the setting you made.  
Enter the proxy server settings exactly as specified by your ISP.  
After necessary settings complete, press the RETURN button to go back  
to 5. Network Setup Menu, select Save Settings, and press the  
ENTER button to save the setting you made.  
a. Proxy Server  
Sets whether the TX-NR900/900E connects to Internet radio station  
through proxy server or not.  
On: Connects to Internet radio station through Proxy Server.  
When you set a.DHCP/AUTO IP to Off, select an menu item under b.  
and press the ENTER or  
number-entry mode.  
Select a number using the  
enter the number.  
button, the TX-NR900/900E enters the  
Off: Connects to Internet radio station without Proxy Server.  
/
buttons, and press the ENTER button to  
b. Proxy Address  
Enter the domain name of the proxy server.  
When you set a.Proxy Server to On, select this menu item and press the  
After all the necessary numbers are entered, the TX-NR900/900E exits  
the number-entry mode.  
ENTER or  
mode.  
Select a character using the  
button, the TX-NR900/900E enters the character-entry  
a. DHCP/AUTO IP  
Sets whether the network setting is configured automatically or not.  
/
/
/
buttons, and press the ENTER  
button to enter the character.  
After all the necessary characters are entered, the TX-NR900/900E exits  
the character-entry mode.  
On: The network setting will be configured automatically. When you set  
this option to On, the values for b. through f. will be assigned using  
DHCP.  
Off: The network setting is configured manually.  
c. Proxy Port  
Enter the port number of the proxy server.  
When you set a.Proxy Server to On, select this menu item and press the  
b. IP Address  
You will enter this value when you set the a.DHCP/AUTO IP setting  
above to Off.  
Enter the IP address assigned to your TX-NR900/900E. If your TX-  
NR900/900E is directly connected with an xDSL modem or terminal  
adapter, be sure to enter the static IP address exactly as specified by your  
ISP.  
ENTER or  
button, the TX-NR900/900E enters the number-entry  
mode.  
Select a number using the  
button to enter the number.  
/
/
/
buttons, and press the ENTER  
After all the necessary numbers are entered, the TX-NR900/900E exits  
the number-entry mode.  
Specify the IP address within the range below. The Net-Tune Central  
cannot be used with the IP addresses out of the ranges below.  
Note:  
CLASS A: 10.0.0.010.255.255.255  
After setting, allow approx. 2 seconds until the TX-NR900/900E stores  
all of the data in the memory. Be sure not to turn off the power during  
that time otherwise the data will be lost.  
CLASS B: 172.16.0.0172.31.255.255  
CLASS C: 192.168.0.0192.168.255.255  
Because the most of the routers commercially available is set to the  
CLASS C IP address, specify the CLASS C IP address for the TX-  
NR900/900E.  
5-3. MAC Address Sub-menu  
You can view the assigned MAC address. Every network port is  
identified by a unique MAC address. (This is read-only information.)  
c. SUBNET Mask  
You will enter this value when you set the a.DHCP/AUTO IP setting  
above to Off.  
Enter the subnet mask. If your TX-NR900/900E is directly connected  
with an xDSL modem or terminal adapter, be sure to enter the subnet  
mask exactly as specified by your ISP. Usually, enter 255.255.255.0  
here.  
a. MAC Address  
Displays the MAC address assigned to your TX-NR900/900E.  
d. Gateway  
You will enter this value when you set the a.DHCP/AUTO IP setting  
above to Off.  
Enter the IP address of the default gateway. If your TX-NR900/900E is  
directly connected with an xDSL modem or terminal adapter, be sure to  
enter the gateway address exactly as specified by your ISP. If your TX-  
NR900/900E is connected to a gateway/router, enter the IP address of  
the gateway/router.  
DNS Server  
e. 1st  
f. 2nd  
You will enter this value when you set the a.DHCP/AUTO IP setting  
above to Off.  
Enter the IP address of the DNS server. If your TX-NR900/900E is  
directly connected with an xDSL modem or terminal adapter, be sure to  
enter the DNS address exactly as specified by your ISP.  
When your Internet service provider provides only one DNS address  
with you, enter this address into e.1st. When two or more DNS  
addresses are provided, enter two of them into e.1stand f.2nd”  
respectively.  
Note:  
After setting, allow approx. 2 seconds until the TX-NR900/900E stores  
all of the data in the memory. Be sure not to turn off the power during  
that time otherwise the data will be lost.  
7
 
Configuring Various Settings  
Appendix  
5-4. Client Sub-menu  
Troubleshooting guide  
A client is a device that receives information from a sever. One server  
can serve multiple clients.  
Throughout this guide, the term clientrefers to your TX-NR900/900E.  
Pressing the NET AUDIO button on the main unit (or the  
NET A button on the remote controller) fails to activate the  
Internet radio or music server feature.  
a. Client Name  
Shows the name used on the Net-Tune Central.  
The client name already has been set by the TX-NR900/900E.  
Imperfect network connection.  
© Check the connection between this unit and the LAN side port of your  
router (gateway).  
© Make sure that the modem and router (gateway) are correctly connected.  
Also, make sure that the power is on.  
© Make sure that the Network Setup is configured properly.  
b. Wakeup on LAN (Network connection status)  
Sets whether leaves the network connection open or not while the TX-  
NR900/900E is in the standby state.  
The playback sound discontinues while using the Music  
Server.  
On: Leaves the network connection open.  
Off: Closes the network connection while the TX-NR900/900E is in  
the standby state. You can save the power consumption during  
standby state.  
Excessive load on the network or server. Or processor-intensive applications  
including word processor and spreadsheet are running.  
© Make sure that your system satisfies all the system requirements listed on  
page 1.  
c. NTSP Port  
© When you download or copy the large file on the PC, the playback sound  
may discontinue. In such case, upgrade your PC to higher performance  
model or close unnecessary application. And it is recommended that you  
deploy the new server PC dedicated to the Net-Tune Central.  
When you play WAVE files on multiple TX-NR900/900E, the playback  
sound may discontinue because of network overload. In this case,  
deploying another independent LAN dedicated to the Net Audio to  
separate from general LAN connection, or adding switching hub or router  
to improve network traffic may resolve the problem.  
You can change the TCP/IP port number used for communicating with  
the Net-Tune Central. Be sure to match the port number set here with the  
port number set on the Net-Tune Central.  
Select a number using the  
button to enter the number.  
/
/
/
buttons, and press the ENTER  
After all the necessary numbers are entered, the TX-NR900/900E exits  
the number-entry mode.  
Save Settings  
Select Save Settingsusing the  
The unit fails to obtain a station list from an Internet radio  
site (via the XiVA internet Radio Service).  
/
button, and press the button to  
save the settings made at 5-1. through 5-4.  
Never turn off the TX-NR900/900E while saving the settings.  
The radio site is now out of service or otherwise inaccessible due to some  
other reason such as maintenance.  
© Try to access the site after a while.  
Selecting the Music Serverfails to play music or fails to  
connect to the server.  
Your PC is not turned on, or Net-Tune Central is not running.  
© Turn on your PC, and start Net-Tune Central.  
No audio files found on the server.  
© Create MP3, MWA, and/or WAV audio files on your PC, and use Net-  
Tune Central to create the list of audio files saved on your PC.  
The network is down because of some failures.  
© Turn off the power of the TX-NR900/900E and turn it on again. (When  
the TX-NR900/900E is without power switch, unplug the power cord and  
plug it again.)  
If this does not resolve the problem, reboot the PC running the Net-Tune  
Central server.  
The NTSP Port setting on the TX-NR900/900E differs from that of Net-Tune  
Central.  
© Go to 5-4.Client Setup Sub-menu, select c.NTSP Port, then set the  
same value as used for Net-Tune Central.  
Search by album returns no match.  
The audio file list of Net-Tune Central contains no files that have album  
names.  
© Assign album names to the files contained in the audio file list of Net-  
Tune Central.  
Search by artist returns no match.  
The audio file list of Net-Tune Central contains no files that have artist  
names.  
© Assign artist names to the files contained in the audio file list of Net-Tune  
Central.  
Search by genre returns no match.  
The audio file list of Net-Tune Central contains no files that have genre  
names.  
© Assign genre names to the files contained in the audio file list of Net-Tune  
Central.  
No playlist can be selected.  
You have not yet created any playlist in Net-Tune Central.  
© Create playlists in Net-Tune Central.  
Specifications  
Ethernet port: 10BASE-T  
Supported audio file format: MP3, WMA, WAV (non-compression,  
sampling rates of 32kHz, 44.1kHz, and 48kHz supported).  
Printed in Japan  
D0210-2  
E
SN 29343454A  
 

Miele Convection Oven H 333 User Manual
Miele Dishwasher G 1262 User Manual
MTD Log Splitter 24640 7 User Manual
Nady Systems Insulin Pen ADI 2 User Manual
National Instruments Network Card NI TB 2708 User Manual
Novo Nordisk Insulin Pen 30 User Manual
Numark Industries CD Player CDN 22MK III User Manual
Oki Printer 2024 User Manual
Onkyo Stereo Receiver SR805 User Manual
Panasonic Answering Machine KX TVP200 User Manual